Get Adobe Flash player

STEP 2 : outer rail.

In STEP 2, you will install both outer rails.

Find bag STEP 2 and the tools you need.

TIP : remove carefully the yellow painters tape .

The rubber washers and nylon spacers are already installed around the bolts. They are all needed. Install the rails 'as is', with rubber washers around.

ATTENTION : around the M4 bolt is a nylon spacer and TWO rubber washers, this is NOT a mistake, leave it this way.

Of course, left and right ...

TIP : turn the bolts alternately top and bottom, do not try to get one in fully before doing the other bolt.

HOW STRONG ? easy : the rails should touch the Goldwing's plastic from top to bottom. Do NOT over tighten the bolts, that may bent the rail, which will give poor performance afterwards. Just screw untill the rail touches the plastic over the full lenght.

FOR F6B, it looks like this :

Cut away the self adhesive tape afterwards !

End of STEP 2.

click for previous STEP 1                                                 click for next STEP 3


traffic analytics